RedRegulatorForums  

Go Back   RedRegulatorForums > Model Specfic Tricks/Modifications

Reply
 
Thread Tools Display Modes
  #1  
Old 07-11-2019, 09:01 PM
nickmo nickmo is offline
Enthusiast
 
Join Date: Dec 2009
Location: Jersey shore
Posts: 210
Default Bennett trim tabs switch

Thanks to you I have narrowed down my trim tab issue to a bad switch.
I want to replace both, but can't see any way that they're fastened. Has anyone removed them? Are they caulked in?
Reply With Quote
  #2  
Old 07-11-2019, 11:14 PM
gary999 gary999 is offline
Enthusiast
 
Join Date: Jun 2011
Posts: 1,413
Default

Pop off the switch bezel and unscrew the 4 screws. I replaced mine with the euro rocker switch when I replaced the pump. Both were going bad.
__________________
2002 26 FS with 2015 DF300AP Zukes.
Reply With Quote
  #3  
Old 07-12-2019, 08:54 AM
heatme heatme is offline
Newbie
 
Join Date: Sep 2018
Posts: 75
Default

my bennetts would not work either and narrowed it down to a wiring issue, so be sure to check your wiring first before replacing the switch. use a continuity tester to make sure all wire are intact.
Reply With Quote
  #4  
Old 07-15-2019, 06:42 PM
nickmo nickmo is offline
Enthusiast
 
Join Date: Dec 2009
Location: Jersey shore
Posts: 210
Default

Quote:
Originally Posted by gary999 View Post
Pop off the switch bezel and unscrew the 4 screws. I replaced mine with the euro rocker switch when I replaced the pump. Both were going bad.
Thank you!
Reply With Quote
  #5  
Old 07-15-2019, 06:46 PM
nickmo nickmo is offline
Enthusiast
 
Join Date: Dec 2009
Location: Jersey shore
Posts: 210
Default

Quote:
Originally Posted by heatme View Post
my bennetts would not work either and narrowed it down to a wiring issue, so be sure to check your wiring first before replacing the switch. use a continuity tester to make sure all wire are intact.
Did check all the wiring. What I didn't do was check the voltage. Just used a test light. Turned out the starboard switch was only sending 3 volts to the pump. The pump ran, but wouldn't create enough pressure to move the tab.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 03:20 AM.


Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
2017